External electric heater 2 kW

1 990 kr

(MASH 138 SEK/month, 24 months)

Recommended for use as frost protection and supplementary heating in hot tubs. The heater requires a circulation pump or an external purification system with a circulation pump.

The heater has a built-in "flow switch" contact that stops the water heater if the water flow is suddenly interrupted.

The heater should be placed in a dry and covered area. Remember to insulate when using it outdoors. In a hot tub with a capacity of 1,000 liters, the water is heated approximately 0.7 degrees per hour, assuming that the pool is covered with a lid. (Measured at ambient temperatures between +2 and -5 degrees Celsius).

Category:

The water heater is equipped with a simple adjustable thermostat ranging from 0 to 45 degrees Celsius and a flow switch.
The switch ensures that the water heater automatically turns off when the circulation from the pump stops. 50.
mm glued joint on the inlet and outlet. Heating power: 2000 W. 10 Amp. 230V/50-60 Hz.
The heater should be installed by a professional installer who is qualified to perform hydrotherapeutic
installations.

Specifications
  • Power; 2 kW.
  • oltage; AC 220-240 V, 50/60 Hz.
  • Amperage; 10
  • Maximum pressure; IP45.
  • MPa; 0.035
  • Classification; IP45
  • Heating of 1000 L; +0.7 ºC per hour
Shipping

Shipping cost 350 SEK. Note that the product with the highest shipping cost applies to the entire order.
VAT

VAT is included at 25% of the stated price of the product

Related products

  • Filtration system

     3 900 kr

  • Insulation lid 50mm for Royal and External

     2 800 kr

  • Lid for hot tub with external heater

     5 000 kr

  • Wooden stairs

     900 kr

12 månader Räntefri avbetalning med wasa kredit

Cart

Start typing and press enter to search

Scroll to Top